Tool Shed Application

Posted by Bill Todd on June 16, 2008, 02:19:17 PM

I am looking to create a small off-grid system to provide for some lights and use an occasional power tool in my tool shed.

I am thinking to marry an Advent AS 50W panel with a Xantrex X1500 Battery/Inverter system. (I like this unit because I can also wheel it to the house during a power outage.)

Question: For a single AS50 panel, is a charge controller required/recommended? If so, which would you suggest. I've read the X1500 manual and it is a little vague on this subject.

Also, I am looking at the SunWize adjustable pole mounts for the AS50 Panel. Their data sheet doesn't give dimensions. Any suggestion here?

Thanks in advance to all respondents.

Posted by John D on June 16, 2008, 04:58:45 PM

Re: Tool Shed Application (Reply #1)

It looks as if the x1500 is nothing more than batteries, an inverter, and a battery charger. Unless I missed something you will need a charge controller. Given the size of the solar panel you've selected, you could get by with a charge controller that costs as little as $50.00. Look at some of the low-end Morningstar PWM ones.

You might also consider building your own PV system from scratch. You could then choose batteries and an inverter that more closely meet your needs, and that better match the size of the solar panel you've selected. You should then end up with a more efficient system, and one that is expandable.

John

« Last Edit: June 16, 2008, 05:01:45 PM by John Dalhaus »

Posted by James Cormican on June 17, 2008, 10:47:45 AM

Re: Tool Shed Application (Reply #2)

i understand the dual use and portability of the xpower 1500, but i also agree with john, that i prefer a suitable component based system.

that being said, a 6a controller, will work.

here are some examples

http://store.altenergystore.com/Charge-Controllers/Solar-Charge-Controllers/Pwm-Type-Solar-Charge-Contollers/Morningstar-Charge-Controllers-Pwm/Morningstar-Sunsaver-Ss-6-6A-12V-Pwm-Charge-Cntrlr/p803/

http://store.altenergystore.com/Charge-Controllers/Solar-Charge-Controllers/Pwm-Type-Solar-Charge-Contollers/Phocos-Solar-Charge-Controllers-Pwm/Phocos-CXN10-10A1224V-PWM-Charge-Controller/p6197/

http://store.altenergystore.com/Charge-Controllers/Solar-Charge-Controllers/Pwm-Shunt-Solar-Charge-Controllers/Specialty-Concepts-ASC-Charge-Controller/Specialty-Concepts-ASC-12V-8A-Solar-Charge-Controller/p1481/

cheers,

james
Alt-E staff

AltE
"Making Renewable Do-able"
http://www.altEstore.com/

Tel: 877.878.4060 x107 or +1.978.562.5858 x107
Fax: 877.242.6718 or +1.978.562.5854

Disclaimer and Disclosure

The Alternative Energy Store, Inc reserves the right, within its sole discretion, to refuse or delete any posting or portion thereof, or terminate or block the access to this forum.

The opinions and statements posted on this forum are the opinions and statements of the person posting same, and do not constitute the opinion or act of the Alternative Energy Store, Inc (AltE). The Alternative Energy Store, Inc does not endorse or subscribe to any particular posting. No posting shall be construed as the act or opinion of the Alternative Energy Store, Inc.

Tool Shed Application

Posted by Bill Todd on June 16, 2008, 02:19:17 PM

Posted by John D on June 16, 2008, 04:58:45 PM

Posted by James Cormican on June 17, 2008, 10:47:45 AM

cart

latest posts

top members