Charger Controller for Sanyo Panels

Posted by Sam H. on August 06, 2008, 03:25:30 AM

Charger Controller for Sanyo Panels
What would be a good charge controller match for 3 Sanyo 200W HIP panels?  My battery bank would be 24V after reading on here that 48V would not work well. 
 

Posted by James Cormican on August 06, 2008, 10:17:00 AM

Re: Charger Controller for Sanyo Panels (Reply #1)
for the time being, with the exception of extremely warm climates, your modules will have to be in parallel, and you can choose from the following controllers with no problems.
mx60, flexmax80, apollo T80, and xantrex mppt60.

note the xantrex has integrated gfp, which may change the wiring in an existing dc load center.  the others do not have the feature, so if the modules are on a building, you would have a separate gfp breaker mechanism in your dc load center.

cheers,

james
AltE staff
AltE
"Making Renewable Do-able"
http://www.altEstore.com/

Tel: 877.878.4060 x107  or +1.978.562.5858 x107
Fax: 877.242.6718  or +1.978.562.5854
 
Forums | Design by Scratchmedia | Development by SMF.
© 2001-2005, Lewis Media. All Rights Reserved.

Disclaimer and Disclosure

The Alternative Energy Store, Inc reserves the right, within its sole discretion, to refuse or delete any posting or portion thereof, or terminate or block the access to this forum.

The opinions and statements posted on this forum are the opinions and statements of the person posting same, and do not constitute the opinion or act of the Alternative Energy Store, Inc (AltE). The Alternative Energy Store, Inc does not endorse or subscribe to any particular posting. No posting shall be construed as the act or opinion of the Alternative Energy Store, Inc.

Call Us Today!
877-878-4060

Se habla Español

cart

0 items

latest posts

more »
 

top members